Product Description
high presicion CZPT ized moulding injection plastic derlin pom gear rack
1.Description:
UHMW-PE(Ultra high Molecular CZPT ght CZPT ethylene)is a thermoplastic CZPT plastic with the average
molecular weight more than 9.2 million (100% Virgin UHMW-PE Raw Material). This kind of material with five top performance of high-wear-resistance, good-chemical resistance, low-temperature resistance, self-lubrication and high-impact resistance, which is regarded as a “surprised” CZPT plastic of excellent comprehensive capacity and competitive price. HangZhou CZPT CZPT Industries (Group) Company has studied and applied this material in many industries for many years. And we know that it has the following main characteristics:
2.Characteristics:
1. Very high-wear resistance, seven times wear resistance than steel, four times than PTFE
2. Very high anti-impact resistance, two times impact resistance than PC, five times than ABS.
3. CZPT self-lubrication, the same as PTFE, better than steel and brass appended lubricating oil.
4. CZPT anti-corrosion resistance, it has very stable chemicals property and can endure the corrosion of all kinds of corrosive medium and organic solvent in certain rang of temperature and humidity.
5. Very high-inadhesion resistance, the surface of product hardly affixes other material.
6. Very high-impact resistance, ten times impact resistance than PA66, eight times than PTFE.
7. CZPT low temperature resistance, in liquefied nitrogen (- 196ºC), it still has the prolongation.
few other materials can reach to this performance.
8. CZPT -toxic and clean property, UHMW-PE material that made by HangZhou CZPT CZPT Industries (Group) Company, which meets the Food and Drug Administration (FDA) and CZPT States Department of CZPT (ASDA) permit to apply in food and medicine fields.
The Main Properties of UHMW-PE
| Property | Item No. | Unit | Value | |
| Mechanical Properties | 1 | Density | g/cm3 | 0.94-0.96 |
| 2 | average molecular weight | g/mol | 9.2X106 | |
| 3 | Tensile strength (23ºC in air) | MPa | 22 | |
| 4 | Breaking strength | MPa | 42 | |
| 5 | Tensile strain at break | % | 600 | |
| 6 | Charpy impact strength (notched) | mJ/mm2 | No break | |
| 7 | Ball indentation hardness | N/mm2 | 42 | |
| 8 | Shore D hardness | — | D65 | |
| 9 | Abrading(sand slurry experiment) | — | 100 | |
| 10 | Coefficient of Friction | — | 0.09~0.1 | |
