Solution Description

ECOODA HAVOK III SPINNING REEL

 STRUCTURE:

PARAMETER:
 

Design HAS III  2000 HAS III  3000 HAS III 4000 HAS III 5000
Excess weight/g 245 275 300 440
DRAG Power/kg 5 seven 10 twelve
Gear RATIO five.1:one 5.1:one 5.1:1 4.3:1
LINE For every Take care of Change/cm sixty four seventy four eighty two eighty two
BALL BEARING  ten+one ten+one 10+1 10+one
PA NO/M one.5#/200 
2#/one hundred fifty
three#/110
three#/two hundred
four#/one hundred thirty
five#/a hundred
4#/220
6#/one hundred forty
eight#/one hundred
five#/320
6#/260
eight#/two hundred
PE NO/M 1.5#/180
2#/one hundred forty
3#/90
two#/230
3#/150
four#/one hundred
3#/220
four#/160
6#/one hundred twenty
four#/320
five#/250
six#/210

Particulars:

Carbon fiber human body and protect promise superb strength and lightweight.

Redesigned structure makes a scaled-down friction and an exceptional take care of emotion.

“S” slider aids to wind the line evenly and achieve a smoother casting.

Equally finishes of HAS II 5000’s pinion equipment supported by bearings offer a decrease friction and a higher sensitivity.

CNC machining large-energy aluminum alloy gear with stainless metal shaft can meet up with the wants of diverse intricate fishing methods.

Carbon friction system gives steady and sleek drag.

Ball-shaped aluminum alloy spool increases easy line feed-out.

Showing:

REMARKS:

Q1: Gain
A. We have a lot of several years fishing deal with production experience, and a skilled crew to design and style goods in accordance to customers’ specifications. For the items we dont’t make, we can attempt our very best to support you to look for for a more affordable and much better supplier.           
                                        
Q2: Sample
A. We are glad to provide samples for tests just before the bulk buy, but the smaple and freight billed on buyer. And this sample cost can be returned in accordance to the bulk order quantity.

Q3: Delivery time& foremost time
A. The goods can be delivered out within 3 times right after the payment is obtained when the inventory is obtainable. Or else, it relies upon on the get amount and promoting season.

Q4: Cargo
A. We will select the cargo in accordance to your needs. If you have an Categorical account, we can produce the merchandise on your account. If not, we can try out our best to uncover a less expensive and safer convey for you.

QfiveRight after-sales support
A: For reel, lifetime mend quarantee for ECOODA goods. Sometimes you have to bear the component value.
    For rod: If your 2 sections or 1-and-50 % section rod is broken casused by non-artificial cause, you can get 1 free tip inside the life time. In addition to, you have to spend for the areas and workmanship.
    You have to bear the freight expense although any hurt by incorrect use and not quality dilemma.

Q6: Payment 
A: 
Western Union, T/T
     Please speak to us for extra information on how to pay or any inquiries with regards to payment.

 

US $71.85
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Type: Spinning Reel
Line Capacity(mm): 5/320 6/260 8/200
Gear Ratio: 4.3:1

###

Samples:
US$ 71.85/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

###

Model HAS III  2000 HAS III  3000 HAS III 4000 HAS III 5000
WEIGHT/g 245 275 300 440
DRAG POWER/kg 5 7 10 12
GEAR RATIO 5.1:1 5.1:1 5.1:1 4.3:1
LINE PER HANDLE TURN/cm 64 74 82 82
BALL BEARING  10+1 10+1 10+1 10+1
PA NO/M 1.5#/200 
2#/150
3#/110
3#/200
4#/130
5#/100
4#/220
6#/140
8#/100
5#/320
6#/260
8#/200
PE NO/M 1.5#/180
2#/140
3#/90
2#/230
3#/150
4#/100
3#/220
4#/160
6#/120
4#/320
5#/250
6#/210
US $71.85
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Type: Spinning Reel
Line Capacity(mm): 5/320 6/260 8/200
Gear Ratio: 4.3:1

###

Samples:
US$ 71.85/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

###

Model HAS III  2000 HAS III  3000 HAS III 4000 HAS III 5000
WEIGHT/g 245 275 300 440
DRAG POWER/kg 5 7 10 12
GEAR RATIO 5.1:1 5.1:1 5.1:1 4.3:1
LINE PER HANDLE TURN/cm 64 74 82 82
BALL BEARING  10+1 10+1 10+1 10+1
PA NO/M 1.5#/200 
2#/150
3#/110
3#/200
4#/130
5#/100
4#/220
6#/140
8#/100
5#/320
6#/260
8#/200
PE NO/M 1.5#/180
2#/140
3#/90
2#/230
3#/150
4#/100
3#/220
4#/160
6#/120
4#/320
5#/250
6#/210

Benefits and Uses of Miter Gears

If you’ve ever looked into the differences between miter gears, you’re probably wondering how to choose between a Straight toothed and Hypoid one. Before you decide, however, make sure you know about backlash and what it means. Backlash is the difference between the addendum and dedendum, and it prevents jamming of the gears, protects the mating gear surfaces, and allows for thermal expansion during operation.
gear

Spiral bevel gears

Spiral bevel gears are designed to increase efficiency and reduce cost. The spiral shape creates a profile in which the teeth are cut with a slight curve along their length, making them an excellent choice for heavy-duty applications. Spiral bevel gears are also hypoid gears, with no offsets. Their smaller size means that they are more compact than other types of right-angle gears, and they are much quieter than other types of gear.
Spiral bevel gears feature helical teeth arranged in a 90-degree angle. The design features a slight curve to the teeth, which reduces backlash while increasing flexibility. Because they have no offsets, they won’t slip during operation. Spiral bevel gears also have less backlash, making them an excellent choice for high-speed applications. They are also carefully spaced to distribute lubricant over a larger area. They are also very accurate and have a locknut design that prevents them from moving out of alignment.
In addition to the geometric design of bevel gears, CZPT can produce 3D models of spiral bevel gears. This software has gained widespread attention from many companies around the world. In fact, CZPT, a major manufacturer of 5-axis milling machines, recently machined a prototype using a spiral bevel gear model. These results prove that spiral bevel gears can be used in a variety of applications, ranging from precision machining to industrial automation.
Spiral bevel gears are also commonly known as hypoid gears. Hypoid gears differ from spiral bevel gears in that their pitch surface is not at the center of the meshing gear. The benefit of this gear design is that it can handle large loads while maintaining its unique features. They also produce less heat than their bevel counterparts, which can affect the efficiency of nearby components.

Straight toothed miter gears

Miter gears are bevel gears that have a pitch angle of 90 degrees. Their gear ratio is 1:1. Miter gears come in straight and spiral tooth varieties and are available in both commercial and high precision grades. They are a versatile tool for any mechanical application. Below are some benefits and uses of miter gears. A simple explanation of the basic principle of this gear type is given. Read on for more details.
When selecting a miter gear, it is important to choose the right material. Hard faced, high carbon steel is appropriate for applications requiring high load, while nylon and injection molding resins are suitable for lower loads. If a particular gear becomes damaged, it’s advisable to replace the entire set, as they are closely linked in shape. The same goes for spiral-cut miter gears. These geared products should be replaced together for proper operation.
Straight bevel gears are the easiest to manufacture. The earliest method was using an indexing head on a planer. Modern manufacturing methods, such as the Revacycle and Coniflex systems, made the process more efficient. CZPT utilizes these newer manufacturing methods and patented them. However, the traditional straight bevel is still the most common and widely used type. It is the simplest to manufacture and is the cheapest type.
SDP/Si is a popular supplier of high-precision gears. The company produces custom miter gears, as well as standard bevel gears. They also offer black oxide and ground bore and tooth surfaces. These gears can be used for many industrial and mechanical applications. They are available in moderate quantities from stock and in partial sizes upon request. There are also different sizes available for specialized applications.
gear

Hypoid bevel gears

The advantages of using Hypoid bevel and helical gears are obvious. Their high speed, low noise, and long life make them ideal for use in motor vehicles. This type of gear is also becoming increasingly popular in the power transmission and motion control industries. Compared to standard bevel and helical gears, they have a higher capacity for torque and can handle high loads with less noise.
Geometrical dimensioning of bevel/hypoid bevel gears is essential to meet ANSI/AGMA/ISO standards. This article examines a few ways to dimension hypoid bevel and helical gears. First, it discusses the limitations of the common datum surface when dimensioning bevel/helical gear pairs. A straight line can’t be parallel to the flanks of both the gear and the pinion, which is necessary to determine “normal backlash.”
Second, hypoid and helical gears have the same angular pitch, which makes the manufacturing process easier. Hypoid bevel gears are usually made of two gears with equal angular pitches. Then, they are assembled to match one another. This reduces noise and vibration, and increases power density. It is recommended to follow the standard and avoid using gears that have mismatched angular pitches.
Third, hypoid and helical gears differ in the shape of the teeth. They are different from standard gears because the teeth are more elongated. They are similar in appearance to spiral bevel gears and worm gears, but differ in geometry. While helical gears are symmetrical, hypoid bevel gears are non-conical. As a result, they can produce higher gear ratios and torque.

Crown bevel gears

The geometrical design of bevel gears is extremely complex. The relative contact position and flank form deviations affect both the paired gear geometry and the tooth bearing. In addition, paired gears are also subject to process-linked deviations that affect the tooth bearing and backlash. These characteristics require the use of narrow tolerance fields to avoid quality issues and production costs. The relative position of a miter gear depends on the operating parameters, such as the load and speed.
When selecting a crown bevel gear for a miter-gear system, it is important to choose one with the right tooth shape. The teeth of a crown-bevel gear can differ greatly in shape. The radial pitch and diametral pitch cone angles are the most common. The tooth cone angle, or “zerol” angle, is the other important parameter. Crown bevel gears have a wide range of tooth pitches, from flat to spiral.
Crown bevel gears for miter gear are made of high-quality materials. In addition to metal, they can be made of plastic or pre-hardened alloys. The latter are preferred as the material is less expensive and more flexible than steel. Furthermore, crown bevel gears for miter gears are extremely durable, and can withstand extreme conditions. They are often used to replace existing gears that are damaged or worn.
When selecting a crown bevel gear for a miter gear, it is important to know how they relate to each other. This is because the crown bevel gears have a 1:1 speed ratio with a pinion. The same is true for miter gears. When comparing crown bevel gears for miter gears, be sure to understand the radii of the pinion and the ring on the pinion.
gear

Shaft angle requirements for miter gears

Miter gears are used to transmit motion between intersecting shafts at a right angle. Their tooth profile is shaped like the mitre hat worn by a Catholic bishop. Their pitch and number of teeth are also identical. Shaft angle requirements vary depending on the type of application. If the application is for power transmission, miter gears are often used in a differential arrangement. If you’re installing miter gears for power transmission, you should know the mounting angle requirements.
Shaft angle requirements for miter gears vary by design. The most common arrangement is perpendicular, but the axes can be angled to almost any angle. Miter gears are also known for their high precision and high strength. Their helix angles are less than ten degrees. Because the shaft angle requirements for miter gears vary, you should know which type of shaft angle you require before ordering.
To determine the right pitch cone angle, first determine the shaft of the gear you’re designing. This angle is called the pitch cone angle. The angle should be at least 90 degrees for the gear and the pinion. The shaft bearings must also be capable of bearing significant forces. Miter gears must be supported by bearings that can withstand significant forces. Shaft angle requirements for miter gears vary from application to application.
For industrial use, miter gears are usually made of plain carbon steel or alloy steel. Some materials are more durable than others and can withstand higher speeds. For commercial use, noise limitations may be important. The gears may be exposed to harsh environments or heavy machine loads. Some types of gears function with teeth missing. But be sure to know the shaft angle requirements for miter gears before you order one.

China 5000 Spinning Reel Has III Light Weight Fishing Gear     worm gear motorChina 5000 Spinning Reel Has III Light Weight Fishing Gear     worm gear motor
editor by czh 2023-01-20

Nylon Gear Rack

As one of the leading nylon gear rack manufacturers, suppliers, and exporters of mechanical products, We offer nylon gear racks and many other products.

Please contact us for details.

Manufacturer supplier exporter of nylon gear rack.

Recent Posts